Many homeowners make a series of mistakes concerning asphalt paving and most of the time, those are avoidable mistakes.
Asphalt paving is good for enhancing your walkway and also improving your curb appeals. It is durable and long-lasting but only when done right. Psst: If you’re in Flagstaff, I recommend this professional Flagstaff asphalt paving company.
Below are 7 common paving mistakes that homeowners do
Hiring Inferior Contractors
Many homeowners in a bid to save money engage the services of an inexperienced contractor. This results in having their asphalt turn out pretty bad.
Hiring a good contractor to take care of your asphalt paving, with the correct tools and experience is a sure way in avoiding bad asphalt.
Using Lower Quality Materials
In the market today, there are many asphalt of different mixtures and quantities.
Most contractors will give a lower estimate just to get the project which will result in them using cheaper materials for your job. This will have a bad effect in the long run. You might be thinking also that using lower-quality materials will give you the same result as using high-quality materials, you are making the biggest mistake of the century.
Applying seal preserve and strengthen asphalt surface but then there is a hold on when to use it.
You need to allow your asphalt to have settled before applying sealant. This usually requires 90 days after paving.
Many experts believe that seal coating your asphalt requires at least six months to 1 year.
Choosing The Wrong Materials
No how will you do a job with the wrong material and expect the best result? That doesn’t happen anywhere.
Choosing the right materials is important as this will enable the durability and the cost-effectiveness of your asphalt paving. One thing you should consider is your family needs, climatic conditions, and locality which are factors that may affect the type of materials you choose to use.
Adequate planning is one way best possible to ensure your asphalt paving turns out well. Ensure that the weather conditions are right, have the necessary materials and equipment ready, and be willing to spend as much time as possible, to affect the work and attention it needs.
Also, as we both know that driveway installation and maintenance take time, ample planning should be in place to ensure the success of the project.
Ignoring Slope Controls and Auto-grade Systems
Slope controls and auto-grade systems are put into use to prevent operators mistakes. They are programmed to ensure that the equipment and tools work properly and in line with the environmental factors.
Ensure that the operators are well aware of this and can he functions properly.
Changing speeds and failing to control the material head
Experienced contractors know that changing speeds while laying asphalt will result in bad work as the surface uniformity will be disrupted. This can create sloping and density issues at the end. While engaging the services of an operator, make sure they fully understand how and when to change speed or better still, use speed limiters.
Also, correct controlling of the material head is a must thing to do as this will ensure lack of fluctuations and even and smooth surfaces. These are best carried out with the use of the sensor. Your operators should know how to use this to avoid a bump, waves, or disrupting the smooth surfaces of the asphalt.